G. D. International

Manufacturer of readymade garments, industrial workwear & specialists in PPE

ASTM F 1930

​Manikin Test :  Specimen garments shall be tested for overall flash fire exposure, as a qualification test for the material and shall have and average predicted body burn  rating of not more than 50.

Performance Requirements

Thermal Protective Performance [TPP] :  Material shall be have a “spaced” TPP rating of not less than 25 J/cm2 (6.0 cal/cm2) and a “contact” TPP rating of not less than 12,6 J/cm2 (3.0 cal/cm2)

"User Comfort & Safety is our motto"

AATCC 135

​Heat and Thermal Shrinkage Test :  Fabrics utilized in the construction of flame-resistance garments, excluding manufacturers’ labels, shall be individually tested for thermal shrinkage resistance and shall not shrink  more than 10% in any direction.

ASTM D 6413

Flame Resistance [ Vertical Test ] : Fabric and reflective striping utilized in the construction of flame-resistance garments shall have a char length of not more than 100 mm ( 4 in) and an after flame of not more than 2 seconds, and shall not melt and drip.

NFPA 2112 : Standard on Flame Resistance Garments for Protection of Industrial Personel against Flash fire